HumiSeal Acrylic Gel Description
HumiSeal Acrylic Gel is a fast drying, single component, thixotropic acrylic paste that provides excellent moisture and environmental protection for printed circuit assemblies.
- HumiSeal Acrylic Gel has been designed for use with our acrylic conformal coatings.
- It can be used for sealing, damming and to provide an extra level of protection around component leads.
- HumiSeal Acrylic Gel fluoresces under UV light for ease of inspection and is easily repaired.
- It is in full compliance with the RoHS Directive 2002/95/EC.
Technical data of HumiSeal Acrylic Gel
Attribute | Value |
---|---|
Density, per ASTM D1475 | 0.95 ± 0.02 g/cm3 |
VOC | 699 grams/litre |
Recommended Thickness | ≤ 3mm |
Tack Free Time | 10 min @ 80°C |
Recommended Curing Conditions | 3 hrs @ 80°C |
Time Required to Reach Optimum Properties | 7 days |
Recommended Stripper | HumiSeal® Stripper 1080, 1080EU |
Shelf Life at Room Temperature | 12 months |
Dissipation Factor, at 1MHz and 25°C | 0.01 |
Insulation Resistance, per MIL-I-46058C | 5.5 x 1014 ohms (550TΩ) |
Moisture Insulation Resistance, per MIL-I-46058C | 7.0 x 1010 ohms (70GΩ) |
Application of HumiSeal Acrylic Gel
Cleanliness of the substrate is of extreme importance for the successful application of a Acrylic Gel.
- Surfaces must be free of moisture, dirt, wax, grease, and all other contaminants.
- Otherwise, ionic or organic residues on the substrate could be trapped under Acrylic Gel and cause problems with adhesion or electrical properties.
- The highest long term reliability for a coated printed circuit assembly will be when Acrylic Gel is applied over a clean, dry substrate.
The application of Acrylic Gel over no clean flux is a common practice. The user should perform adequate testing to confirm compatibility between Acrylic Gel and their particular assembly materials and process conditions.
Syringe Application
- HumiSeal Acrylic Gel is intended for automated needle dispensing, but may also be applied manually
Storage
- HumiSeal Acrylic Gel should be stored away excessive heat or cold, in tightly closed containers.
- These products may be stored at temperatures of 0 to 35°C.
- Prior to use, allow the product to equilibrate for 24 hours at a room temperature of 18 to 32°C.
Caution
- Application of HumiSeal Acrylic Gel should be carried out in accordance with local and National Health and Safety regulations.
- Material should not be used in presence of open flame or sparks. Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes.
Where to purchase authentic HumiSeal Acrylic Gel ?
With our reputation, Hicotech has gained the trust of many customers. Contact us now for consultation and to receive the best price for HumiSeal Acrylic Gel product.
Contact information:
Hotline/Zalo. 094 526 1931
Website. Hicotech.com.vn
Email: Sale@hicotech.com.vn
Có 0 bình luận, đánh giá về HumiSeal Acrylic Gel
TVQuản trị viênQuản trị viên